Reference Guide

• On 12G and later systems: read-only
Description
Displays the total capacity of a hard-disk drive. This option is
undefined for removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortACapacity
Applicable Systems PowerEdge 12G and later systems
--SataPortADriveType*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Indicates the type of device attached to the SATA port.
Example:
A:>syscfg --SataPortADriveType
Applicable Systems PowerEdge 12G and later systems
--SataPortAModel*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortAModel
Applicable Systems PowerEdge 12G and later systems
--SataPortB/--sata1
Valid Arguments
• On systems prior to 12G: auto, off
• On 12G and later systems: Auto, Off
Description
Turns the SATA port 1 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata1=auto
sata1=auto
Applicable Systems All PowerEdge systems
78