Reference Guide

Example:
A:>syscfg --eSataPort1Capacity
Applicable Systems PowerEdge 12G and later systems.
--eSataPort1DriveType*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Indicates the type of device attached to the embedded SATA port.
Example:
A:>syscfg --eSataPort1DriveType
Applicable Systems PowerEdge 12G and later systems.
--eSataPort1Model*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --eSataPort1Model
Applicable Systems PowerEdge 12G and later systems.
--SataPortA/--sata0
Valid Arguments
• On systems prior to 12G: auto, off
• On 12G and later systems: Off, Auto
Description
Sets the drive type of the selected device to off or auto This option
can be replicated.
Example:
A:>syscfg --sata0=auto
sata0=auto
Applicable Systems All PowerEdge systems
--SataPortACapacity*
Valid Arguments
• On systems prior to 12G: NA
77