Reference Guide

• On 12G and later systems: Enabled, Disabled
Description
When set to Enabled, it allocates more (Requestor Transaction IDs)
RTIDs to the remote socket thereby increasing cache performance
between the sockets.
Example:
A:>syscfg --RtidSetting=Enabled
RtidSetting=Enabled
Applicable Systems Dell PowerEdge 12G and later systems
--ProcnControlledTurbo
Valid Arguments
• On systems prior to 13G: enable, disable
• On 13G and later systems: Disabled, ControlledTurboLimit,
ControlledTurboLimitMinus1, ControlledTurboLimitMinus2,
ControlledTurboLimitMinus3
Description
Controls the turbo engagement. Enable this option only if
SysProfile is set to PerfOptimized.
NOTE: The value of n in ProcnControlledTurbo can be 1–4.
Example:
A:>syscfg --Proc1ControlledTurbo=Disabled
--ProcConfigTdp
Valid Arguments
• On systems prior to 13G: NA
• On 13G and later systems: Nominal, Level1, Level2
Description
Configures the Thermal Design Power (TDP).
Example:
A:>syscfg --ProcConfigTdp=Nominal
ProcConfigTdp=Nominal
--ProcX2Apic
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables the x2APIC mode.
Example:
A:>syscfg --ProcX2Apic=Enabled
ProcX2Apic=Enabled
75