Reference Guide

Applicable Systems PowerEdge 12G and later systems.
--ProcAdjCacheLine/--adjcacheprefetch
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled
Description
When set to Enabled (default), the system is optimized for
applications that require high utilization of sequential memory
access. When set to Disabled, the system is optimized for
applications that require high utilization of random memory access.
Example:
A:>syscfg --adjcacheprefetch=enable
adjcacheprefetch=enable
Applicable Systems All PowerEdge systems.
--ProcBusSpeed*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the bus speed of the processor.
Example:
A:>syscfg --ProcBusSpeed
Applicable Systems PowerEdge 12G and later systems.
--ProcCores/--cpucore
Valid Arguments
• On systems prior to 12G: 1, 2, 4, 6, 8, 10, 12, 14, 16, all
• On 12G and later systems: single, all, dual, quad, 1, 2, 4, 6, 8, 10,
12, 14, 16, 18
Description
Controls the number of enabled cores in each processor. The default
value is set to the maximum number of cores per processor. The
number of cores depends on the processor. Reading the cpucore
that is set to the highest value of number of cores displays as all.
For example, if 6-core CPU is installed, after setting to the highest
value, 6, when you read the cpucore, it displays as all.
Example:
A:>syscfg --cpucore=1
cpucore=1
Applicable Systems All PowerEdge systems.
72