Reference Guide

• On 12G and later systems: Report, Noreport

Description

Enables or disables the BIOS to report keyboard errors during POST.

This option can be replicated.

Example:

A:>syscfg --rptkeyerr=disable

rptkeyerr=disable

Applicable Systems All PowerEdge systems

One-Time Boot

You can manage the one time boot settings using the options in this group.

--OneTimeBootMode

Valid Arguments

• On systems prior to 12G: NA

• On 12G and later systems: Disabled, OneTimeBootSeq,

OneTimeHddSeq, OneTimeUefiBoot Seq, OneTimeCustomB

ootSeqStr, OneTimeCustomH ddSeqStr, OneTimeCustomU

efiBootSeqStr

Description

Allows to set the one-time boot sequence..

Example:

A:>syscfg --OneTimeBootMode=Disabled

OneTimeBootMode=Disabled

Applicable Systems PowerEdge 12G and later systems.

--OneTimeBootSeqDev/--nextboot

Valid Arguments

• On systems prior to 12G: <valid device name> (from the bootseq

option device list)

• On 12G and later systems: numerical list separated by commas or

list of device names separated by commas

Description

Sets the specified device as the first device in the boot order for the

next boot cycle only. The device must be a device from the bootseq

option device list. Run the bootseq option to see a list of available

device names. For more information, see --bootmode . This option is

not replicated. If Boot Mode is set to UEFI, the system temporarily

switches the Boot Mode to BIOS when attempting a one-time boot

to the device.