Reference Guide

Applicable Systems All PowerEdge systems

--NodeInterleave/--nodeinterleave

Valid Arguments

• On systems prior to 12G: enable, disable

• On 12G and later systems: Enabled, Disabled

Description

Enables node interleaving, if the system is configured with matching

memory. If set to disable (default), the system supports Non-

Uniform Memory (NUMA) architecture memory configurations. This

field is active only if the memory configuration can support node

interleaving.

NOTE: The nodeinterleave option is same as memintleave

option. For more information, see --memintleave.

Example:

A:>syscfg --nodeinterleave=enable

nodeinterleave=enable

Applicable Systems All PowerEdge systems.

--redmem

Valid Arguments

off, spare, mirror, DDDC

Description

Allows selection of the required redundant memory mode, or

disables redundant memory. This option can be replicated.

Example:

A:>syscfg --redmem=off

redmem=off

Applicable Systems PowerEdge systems with Intel Xeon 7500 series processor

--SerialDbgOut

Valid Arguments

• On systems prior to 12G: NA

• On 12G and later systems: Enabled, Disabled

Description

Enables or disables the RC/MRC Serial debug output.

Example:

A:>syscfg --SerialDbgOut=Enabled

SerialDbgOut=Enabled

Applicable Systems PowerEdge 12G and later systems.

--SysMemSize/--mem*

Valid Arguments

• On systems prior to 12G: read-only