Reference Guide

Example:
A:>syscfg --CurrentEmbVideoState
CurrentEmbVideoState=
xxx
Applicable Systems PowerEdge 12G and later systems
--InternalSdCardPrimaryCard
Valid Arguments
• On systems prior to 13G: NA
• On 13G and later systems: SdCard1, SdCard2
Description
Sets an internal SD card as the primary SD card.
A:>syscfg --InternalSdCardPrimaryCard=SdCard1
InternalSdCardPrimaryCard=SdCard1
Network Settings
You can manage the system network settings using the options in this group.
--PxeDevnEnDis
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables the Preboot Execution Environment (PXE) device.
When enabled, an Unified Extensible Firmware Interface (UEFI) boot
option is created for the PXE device.
NOTE: The value of n in PxeDevnEnDis can be 1–4.
Example:
A:>syscfg --PxeDev1EnDis=Enabled
PxeDev1EnDis=Enabled
Applicable Systems PowerEdge 12G and later systems
--PxeDevnInterface
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the NIC interface used for the PXE device.
NOTE: The value of n in PxeDevnInterface can be 1–4.
Example:
A:>syscfg --PxeDev1Interface
Applicable Systems PowerEdge 12G and later systems
54