Reference Guide

When set to disable or AllOff, both front and back user accessible
ports are disabled. This option can be replicated.
Example:
A:>syscfg --usbports=enable
usbports=enable
Applicable Systems All PowerEdge systems.
--MmioAbove4Gb
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled, Disabled
Description
This field helps in enabling support for PCIe devices that require large
amount of memory. Enable this option only for 64-bit operating
systems.
Example:
A:>syscfg --MmioAbove4Gb=Enabled
MmioAbove4Gb=Enabled
--Usb3Setting
Valid Arguments
• On systems prior to 13G: NA
• On 13G and later systems: Auto, Enabled, Disabled
Description
Enables or disables the USB 3.0 port.
• Auto —USB ports operate at USB 2.0 speed.
• Enabled—USB ports operates at USB 3.0 speed.
• Disabled—USB 3.0 host controller is disabled and the speed is
set to USB 2.0.
Example:
A:>syscfg --Usb3Setting=Auto
Usb3Setting=Auto
Applicable Systems
All systems prior to PowerEdge 13G systems
--CurrentEmbVideoState
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the current state of the Embedded Video Controller.
53