Reference Guide

Applicable Systems PowerEdge 11G and later systems
--EmbNic2/--embnic2
Valid Arguments
• On systems prior to 12G: on, off, onnopxe, onwithiscsi
• On 12G and later systems: Enabled, EnabledPxe, EnablediScsi,
Disabled
Description
Turns the second embedded NIC on with PXE on, off, or on without
PXE enabled. This option is only valid for supported systems that have
a NIC. If the NIC is enabled without PXE, it is not found in the boot
order. If the NIC is turned on with PXE, it is placed at the end of the
boot order. The onnopxe argument is not supported on all systems.
The onwithiscsi argument enables the embedded NIC to boot from
the iSCSI server. The embnic1 option can be replicated.
Example:
A:>syscfg --embnic2=onnopxe
embnic2=onnopxe
Applicable Systems All PowerEdge systems
--EmbNic3/--embnic3
Valid Arguments
• On systems prior to 12G: on, off, onnopxe, onwithiscsi
• On 12G and later systems: Enabled, EnabledPxe, EnablediScsi,
Disabled
Description
Turns the third embedded NIC on with PXE on, off, or on without PXE
enabled. This option is only valid for supported systems that have a
NIC. If the NIC is enabled without PXE, it is not found in the boot
order. If the NIC is turned on with PXE, it is placed at the end of the
boot order. The onnopxe argument is not supported on all systems.
The onwithiscsi argument enables the embedded NIC to boot from
the iSCSI server. The embnic1 option can be replicated.
Example:
A:>syscfg --embnic3=onnopxe
embnic3=onnopxe
Applicable Systems All PowerEdge systems
--EmbNic3Nic4/--embnic3nic4
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled, DisabledOs
Description
Enables or disables the operating system interface of the third and
fourth embedded NIC controllers.
47