Reference Guide

Error Code Message
1005 Invalid encrypted array disk list for the instant secure erase
operation.
1006 Sector drives 512B and 4KB must not be combined while creating
a virtual disk.
1007 Hot spare sector size for the virtual disk is not matching.
1008 sectorsize parameter is not found.
1009 Warning! Cannot assign global hotspare. Input array disk can
act as a hotspare only for virtual disks with matching sector
size (4KB or 512B) and supported T10 PI capability. Use "-
force" option to discard the warning.
1010 Force option is invalid for this operation on the specified
controller.
1011 Input values for vdiskprotectioninfo and vdpi are 1 and 0.
1012 vdiskprotectioninfo or vdpi option is not available on the
controller.
1013 Input array disks or hotspares are not PI-capable.
1014 Creation of RAID 10 virtual disk with Uneven Span failed.
1015 Spanlength is not required for creating a RAID10 virtual disk
on this controller.
1016 Unsupported operation. RAID 6 and RAID 60 virtual disks which
are T10 PI enabled do not support Slow Initialize.
1017 Operation is not supported. The specified controller does not
have encryption capability.
1018 Operation is not supported. Encryption key is not present on
the specified controller.
1019 The specified array disks or hotspares do not have encryption
capability.
1020 The specified controller does not have a locked foreign
configuration.
1021 Invalid passphrase.
1022 Input values for secureflag and sf are 1 and 0.
1023 Unsupported operation. Preserved cache is not present on the
controller.
1024 Invalide Key Id
1025 Encryption key is already set for the controller.
229