Reference Guide

Error Code Message
210 Cannot have silent and logfile switch with the same command.
211 Invalid array disk(s)!
212 Invalid failover disk(s)!
213 Creation of a virtual disk on this RAID controller requires
the use of the entire disk space of the array disks. The size
or - sz parameter is not needed.
214 Invalid size given! size=max or -sz=max is not supported for
this RAID controller.
215 The value given for envname or -envn is null or too long.
216 Invalid virtual disk size!
217 The strict option provided failed! Virtual disk is not
created.
218 Unable to determine optimum size for Virtual disk. Ensure that
the array disks are of the same protocol (i.e. SAS, SATA,
SCSI). If there is a mismatch of the array disks then the
RAIDCFG will not be able to determine the optimum size. In
addition, also ensure that there is drive size available for
the specified virtual disk.
219 One or more array disks selected to create virtual disk or
hotspare doesn't have enough disk space. Please make sure that
all the array disks and failover drives selected have enough
free space.
220 The number of array disks provided is incorrect for the
requested RAID Type! RAID 1 requires exactly 2 array disks,
RAID 5 requires at least 3 array disks, RAID 10 requires at
least 4 array disks and RAID 50 requires at least 6 array
disks.
221 No free array disks found!
222 No global failover disks found!
223 One or more array disks selected for the virtual disk has
foreign configuration.
224 Error in opening the file.
225 SAS 5/IR, SAS 6/IR, H200 and SW RAID requires atleast two
physical disks to create RAID 0 or RAID 1.
226 No Foreign configuration present in the controller.
227 The virtual disk cannot be created on the physical disks you
selected. Possible reasons include:unsupported mix of SAS and
SATA protocol type disks, unsupported mix of SSD and HDD media
disks.
227