Reference Guide

Error Code Message
164 Driver could not execute.
165 Cannot delete virtual disk.
166 Cannot set temperature probe. Invalid value entered.
167 Cannot set enclosure tag. Invalid value entered.
168 Cannot set enclosure alarm.
169 Temperature probe value out of range.
170 Cannot set cache mode.
172 Data will be lost on the secondary disk and a reboot will be
forced.
173 Cluster Services (MSCS) is running. Deleting a virtual disk
that contains a cluster resource can result in unpredictable
errors or system hangs (quorum disk). You should shut down
cluster services before deleting cluster resources. Are you
sure you want to proceed?
174 Cannot perform Create Virtual Disk or Delete Virtual Disk
while the other server in a cluster is online. Please shut one
of the servers down and retry the operation.
176 Invalid array disks or failover drives selected for
reconfigure/create operation. Please make sure that all array
disks and failover drives associated with the virtual disk are
selected.
177 The maximum number of partitions have already been created on
one of the selected array disk(s). Each array disk can hold
portions (partitions) of up to 10 virtual disks. This virtual
disk cannot be created because one or more array disk(s) have
reached the partition limit.
178 The virtual disk is in use. Please close any applications that
use the virtual disk and unmount any file systems that reside
on the virtual disk.
179 The firmware version is not supported. Please update the
firmware from http://support.dell.com.
180 The specified device does not have enough free space to be
used as failover space for the specified virtual disk.
181 The operation failed. Please rescan the controller and retry
the operation.
182 The operation cannot be performed while a task is running on
the specified virtual disk.
183 The specified virtual disk has no dead disk segments.
225