Reference Guide

Option Sub-option Valid Arguments Description
destination IP address in response to a
chassis intrusion event):
A:>syscfg pefcfgparams --
filter= intrusion--
filteralert=disable
pefcfgparams filter=
intrusion filteralert=disable
powerbutton
Option Sub-option Valid Arguments Description
--powerbutton
NA
enable,
disable
Enables or disables the power button.
This option can be replicated.
Example:
A:>syscfg --powerbutton=enable
powerbutton=enable
powerctl
Option Sub-option Valid Arguments Description
--powerctl
NA
powerdown
Performs a chassis powerdown and
controls the reset of the system.
Powerdown turns off the system.
powercycle
Turns off the system and automatically
turns on your system after a few
seconds.
reset
Resets the system.
softshutdown
In Linux, the system turns off
immediately.
NOTE: In Windows PE, this option
does not work.
NOTE: This option applies only to
PowerEdge systems that are
configured with a BMC.
NOTE: This argument requires ACPI
support to function properly.
139