Reference Guide

lcd1
Option Sub-option Valid Arguments Description
--lcd1
NA <string>
Sets the first line of user-defined text on
the system LCD. This option can be
replicated. For more information on
delimiters, see Command Line Option
Delimiters.
NOTE: Before setting user strings
for --lcd1 , ensure that --lcd is
set to user.
lcd2
Option Sub-option Valid Arguments Description
--lcd1
NA <string>
Sets the second line of user-defined text
on the system LCD. This option can be
replicated. For more information on
delimiters, see Command Line Option
Delimiters.
loaddefaults*
Option Sub-option Valid Arguments Description
--
loaddefaults*
NA NA
Restores the BMC to the defaults
originally loaded on the controller. This
option is used to return the BMC to a
known-good state. This option cannot
be replicated.
NOTE: The NMI, power button, and
SOL defaults are not reset by using
this option.
Example:
A:>syscfg --loaddefaults
Loading defaults...
nextboot
Option Sub-option Valid Arguments Description
--nextboot or --
OneTimeBootSeqDev
NA valid device name
(from the
bootseq option
device list)
Sets the specified device as the first
device in the boot order for the next
boot cycle only. The device must be a
device from the bootseq option
device list. Run the bootseq option
to see a list of available device names.
135