Reference Guide

lancfgparams
Option Sub-option Valid
Arguments
Description
lancfgparams
or lcp
Configures and displays LAN
configuration parameters. This option
can be replicated.
--ipaddrsrc static,
dhcp
Sets the IP address source for the LAN
channel. This sub-option can be
replicated.
--ipaddress <ipaddress>
Sets the IP address for the LAN
channel. This sub-option cannot be
replicated.
--subnetmask <subnetmask
>
Sets the subnet mask for the LAN
channel. This sub-option can be
replicated.
--gateway <gateway>
Sets the gateway for the LAN channel.
This sub-option can be replicated.
--commstring <string>
Sets the community string (maximum
of 16 printable ASCII characters) used
in a platform event trap (PET). This
sub-option can be replicated.
--destipaddr
<ipaddress>
Sets the destination IP address or Fully
Qualified Domain Name (FQDN) for
the alert destination specified with the
alertdest sub-option.
The destipaddr sub-option is
dependent on the
alertdest sub-
option. If the alertdest sub-option
is not specified on the command line,
the first alert destination
(
alertdest=1) is set with this IP
address or FQDN. This sub-option
can be replicated.
NOTE: FQDN is applicable only
for destipaddr option and is
supported only on PowerEdge
12G systems.
Example 1 (to set the destination IP
address):
A:>syscfg lcp --alertdest=1
--destipaddr=192.168.100.15
130