Reference Guide

--usb
Valid Arguments on, legacy, off
Description
Sets or reports the status of the USB port. When set to on, USB
keyboards and mice function only for systems with operating
systems that have native USB support. When set to legacy, USB
keyboards and mice are supported through the BIOS to function in
operating systems that do not natively support USB . This option can
be replicated.
Example:
A:>syscfg --usb=on
usb=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--usbflash
Valid Arguments
auto, fdd, hdd
Description
Sets or reports the emulation for a USB flash device. The USB flash
device can be set to emulate a hard drive (HDD) or a diskette drive
(FDD). This option can be replicated.
Example:
A:>syscfg --usbflash=auto
usbflash=auto
Applicable Systems All systems prior to PowerEdge 12G systems.
--vflash
Valid Arguments
enable, disable
Description
Enables or disables vflash on iDRAC.
Example:
A:>syscfg --vflash=enable
vflash=enable
Applicable Systems All PowerEdge 11G systems or systems with iDRAC6
identify
Valid Arguments
0–254
Description
Flashes the identification LED for a specified number of seconds.
NOTE: Use 0 to stop the blinking of the LED.
128