Reference Guide

--mouse
Valid Arguments on, off
Description
Turns the mouse controller on or off.
This option can be replicated.
Example:
A:>syscfg --mouse=off
mouse=off
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--noraidprompt*
Valid Arguments
NA
Description
Specifies that the BIOS must not prompt for confirmation when
changing the mode of a RAID controller. This option can only be
used with the --embscsiraid or --embscsiraidchb options.
Without this option, the user is prompted during POST to confirm the
change of a RAID controller from RAID (SCSI) to SCSI (RAID). This
option is not replicated.
CAUTION: When changing a RAID controller from SCSI to RAID
or from RAID to SCSI, data is lost on the affected hard drives.
The warning message for this data is not displayed if you use
the
--noraidprompt option. To avoid data loss, back up any
information on the hard drives before changing the type of
controller used with the drives
Example:
A:>syscfg --embscsiraid=raid --noraidprompt
embscsiraid=raid
Applicable Systems
All PowerEdge systems prior to PowerEdge 12G systems.
--oldsetuppwd
Valid Arguments
<string>
Description
Allows to set a new setup password if a setup password is already
present on the system. The setup password locks the BIOS setup
screen. The argument string supplied to this option is the current
password. If this password is not correct, the new setup password is
not applied to the system. Generally, passwords are limited to
alphanumeric characters and cannot exceed 32 characters in length.
This option is not replicated. For more information on delimiters, see
Command Line Option Delimiters.
124