Reference Guide

Example:
A:>syscfg --lpt=lpt1
lpt=lpt1
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--memdynamicpower
Valid Arguments enable, disable
Description
Enables or disables the dynamic memory power states. This option
can be replicated.
Example:
A:>syscfg --memdynamicpower=enable
memdynamicpower=enable
Applicable Systems PowerEdge systems with Intel Xeon 7500 series
--memintleave
Valid Arguments
enable, disable
Description
Enables or disables the memory interleave mode. This option can be
replicated.
Example:
A:>syscfg --memintleave=enable
memintleave=enable
NOTE: The memintleave option is same as Nodeinterleave
option. For more information, see Memory Settings group.
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--memremap
Valid Arguments
off, auto
Description
Sets the memory remapping to off or auto.
Example:
A:>syscfg --memremap=off
memremap=off
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
123