Reference Guide

--dbpm
Valid Arguments enable, disable
Description
Enables or disables demand-based power management. This option
can be replicated.
Example:
A:>syscfg --dbpm=enable
dbpm=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embhypervisor
Valid Arguments
off, on
Description
Turns on or off the embedded hypervisor port.
Example:
A:>syscfg --embhypervisor=on
embhypervisor=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embideraid
Valid Arguments
on, off
Description
Turns on or off the embedded IDE RAID controller. This option is only
valid for supported systems that have IDE ROMB. This option can be
replicated.
Example:
A:>syscfg --embideraid=on
embideraid=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embnic1pxe
Valid Arguments
enable, disable
Description
Enables or disables Preboot Execution Environment (PXE) on the first
embedded NIC. If PXE is disabled, the first NIC is not found in the
boot order. If PXE is enabled, the first NIC is placed at the end of the
boot order. This option is only present on systems that do not
support the embnic1 option. This option can be replicated.
109