Reference Guide

--SecureBoot
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables the BootSeqRetry feature. When set to Enabled,
the system reattempts the boot sequence after a 30-second timeout,
if the last boot attempt has failed.
Example:
A:>syscfg --SecureBoot=Enabled
SecureBoot=Enabled
Applicable Systems PowerEdge 12G and later systems
--SecureBootPolicy
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Standard, Custom
Description
Sets the process to authenticate pre-boot images. When set to
Standard, the BIOS uses the system manufacturer keys and
certificates to authenticate pre-boot images. When set to Custom,
the BIOS uses user-defined keys and certificates. The default value is
Standard.
Example:
A:>syscfg --SecureBootPolicy=Standard
SecureBootPolicy=Standard
Applicable Systems PowerEdge 12G and later systems
--UefiVariableAccess
Valid Arguments
• On systems prior to 13G: NA
• On 13G and later systems: Standard, Controlled
Description
Secures the UEFI variables. When set to Standard, the UEFI variables
are accessible from the operating system as per the UEFI
specification. When set to Controlled, selected UEFI variables are
protected in the operating system and new UEFI boot entries are
pushed to the end of the current boot order.
Example:
A:>syscfg --UefiVariableAccess=Standard
UefiVariableAccess=Standard
Applicable Systems PowerEdge 13G and later systems
106