Users Guide
– Windows 7 (64-bit) using Windows PE 3.0 (64-bit) in BIOS and UEFI mode
– Windows 7 (32-bit) using Windows PE 3.0 (32-bit) in BIOS mode
For Linux, the DTK utilities support deploying the following operating systems:
• Red Hat Enterprise Linux 7.0 (64-bit) in BIOS and UEFI mode
• Red Hat Enterprise Linux 6.5 (64-bit) in BIOS and UEFI mode
• SUSE Linux Enterprise Server 11 SP3 (64-bit) in BIOS and UEFI mode
You can install the DTK Linux RPM utilities on the following operating systems:
• Red Hat Enterprise Linux 7.0 (64-bit) in BIOS and UEFI mode
• Red Hat Enterprise Linux 6.5 (64-bit) in BIOS and UEFI mode
• SUSE Linux Enterprise Server 11 SP3 (64-bit) in BIOS and UEFI mode
NOTE: The RPMs are available in the RPMs folder of DTK ELI ISO at linux.dell.com/repo/hardware,
and also in the Dell Systems Management Tools and Documentation DVD.
Supported BIOS Firmware Versions
The latest (n) version or the n-1 version of BIOS firmware that is available at support.dell.com.
Prerequisites And Requirements
The prerequisites and requirements to run DTK utilities are as given below.
NOTE: The target system must not have Fibre Channel (FC) devices.
See Also:
• Installation Prerequisites
• Deployment Prerequisites
Installation Prerequisites
Before installing the DTK components for Windows PE, ensure that you have the following:
• The DTK self-extracting zip file (DTKX.X-WINPE-XX.exe), which contains the utilities, sample scripts,
sample configuration files, and documentation to deploy your Dell system.
• A Windows workstation or server that has 512 MB of RAM.
Before installing DTK components for embedded Linux, ensure that you have the following:
• The DTK ISO image, which contains the utilities, sample scripts, sample configuration files, RPMs, and
documentation to deploy your Dell system.
NOTE: The DTK ISO contains two bootloaders (isolinux for BIOS mode and grub2 for UEFI
mode).
• A Linux workstation that has at least 200 MB of free hard-drive space.
11