Reference Guide

Option Sub-option Valid Arguments Description
--solbitrate 9600, 19200
Sets the serial channel
communication bit rate (in bps) with
the BMC when SOL is activated. This
option can be replicated.
NOTE: The arguments for
solbitrate vary with various
Dell systems. If an argument
valid for a particular Dell system
is entered for another system,
the Parameter out of
range
error is displayed.
Example 1 (to display the current
SOL configuration):
A:>syscfg solcfgparams
solcfgparams
solenable=enable
solprivlevel=administrator
solcharaccum interval=25
solcharsend threshold=25
solbitrate=9600
Example 2 (to set the SOL
configuration parameters):
A:>syscfg solcfgparams
--solenable=disable
--solprivlevel=administrator
--solcharaccum interval=25
--solcharsend threshold=100
--solbitrate=9600
solcfgparams
solenable=disable
solprivlevel=administrator
solcharaccum interval=25
solcharsend threshold=100
solbitrate=9600
useraction
Option Sub-option Valid Arguments Description
useraction
Enables and disables BMC, sua, and lua
user IDs. This option can be replicated.
--userid
2–16, if your
system has a DRAC
5 controller
Specifies the BMC user ID. This sub-
option can be replicated.
--action enable,
disable
Enables or disables the user ID specified
using the userid sub-option. This sub-
option can be replicated. This sub-
option is dependent on the userid
sub-option.
92