Reference Guide

Example:

A:>syscfg --SecureBootPolicy=Standard

UEFI Boot Settings

You can manage the UEFI settings using the options in this group.

--UefiBootSeq

Valid Arguments list of device names separated by commas

Description

Enables, disables, and orders the devices in a UEFI boot order list.

Only the devices present on the system are listed in the UefiBootSeq.

The first option in the list is attempted first. If the first option is not

successful, the second option is attempted, and so on. The system

attempts to launch only the enabled boot options and does not

launch disabled boot options. This option is applicable when

BootModeis set to UEFIand has no effect when BootMode is set to

BIOS.

NOTE: Only the devices listed in the BootSeq are enabled.

SYSCFG For BMC And Remote Access Controller

Configuration

SYSCFG configures Baseboard Management Controller (BMC) and Remote Access Controller (RAC)

settings.

NOTE: Some of the following options or arguments might not be available on all systems.

NOTE: For options that use text strings such as username, password, hostname, and community

string, using some characters such as <space>, <, >, | , or = on the command line can be

misinterpreted by the command line parser and cause errors.

The following tables document valid options, sub-options, and arguments along with a description of the

expected behavior of each option and suboption. Options, sub-options, and arguments are case-

sensitive. All options, sub-options, and pre-defined arguments are lowercase unless explicitly stated

otherwise. Some features that must be noted while reading this section are:

• Unless otherwise specified, all sub-options to options are optional.

• If a sub-option is not specified for an option, all valid sub-option values are displayed for the option. If

sub-options are specified, then only those suboptions are reported.

• Wherever options or sub-options take empty strings as input, the string NULL should be input. For

example, options such as

username and suboptions such as commstring and hostname can take an

empty string as input.