Reference Guide

--MemFrequency
Valid Arguments MaxPerf, 2133MHz, 1866MHz, 1600MHz, 1333MHz, 1067MHz,
800MHz, MaxReliability
Description
Sets the speed of system memory.
Example:
A:>syscfg --MemFrequency=MaxPerf
--MemPatrolScrub
Valid Arguments
Standard, Extended, Disabled
Description
Sets the Memory Patrol Scrub frequency as Standard, Extended, or
Disabled mode.
Example:
A:>syscfg --MemPatrolScrub=Standard
--MemRefreshRate
Valid Arguments
1x, 2x
Description
Sets the Memory Refresh Rate as 1x or 2x
Example:
A:>syscfg --MemRefreshRate=1x
--MemVolt
Valid Arguments
AutoVolt, Volt15V, Volt135V
NOTE: Volt15V represents 1.5 Volt and Volt135V represents 1.35
Volt.
Description
Sets the DIMM voltage selection.
Example:
A:>syscfg --MemVolt=AutoVolt
--MonitorMwait
Valid Arguments
Enabled, Disabled
Description
Enables or disables Monitor/Mwait instructions. You can disable
Monitor/Mwait only when C state is disabled in Custom mode.
Example:
A:>syscfg --MonitorMwait=Enabled
66