Reference Guide

--SataPortJDriveType*
Valid Arguments read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortJDriveType
--SataPortJModel*
Valid Arguments read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortJModel
--SecurityFreezeLock
Valid Arguments
Enabled, Disabled
Description
Sends the Security Freeze Lock command to the embedded SATA
drives during power-on self-test (POST). The option is applicable
only to ATA and AHCI, and not to RAID.
Example:
A:>syscfg --SecurityFreezeLock=Enabled
Serial Communication
You can manage the serial port settings using the options in this group.
--ConTermType
Valid Arguments
Vt100Vt220, Ansi
Description
Sets the remote console terminal type. This option is available on all
supported systems that support console redirection. This option can
be replicated.
Example:
A:>syscfg --ConTermType=Vt100Vt220
--ExtSerialConnector
Valid Arguments
Serial1, Serial2, RemoteAccDevice
Description
Associates the External Serial Connector to Serial Device 1, Serial
Device 2, or the Remote Access Device.
62