Reference Guide

--SataPortH
Valid Arguments Off, Auto
Description
Turns the SATA port H to Auto or Off. This option can be replicated.
Example:
A:>syscfg --SataPortH=Auto
--SataPortHCapacity*
Valid Arguments read-only
Description
Displays the total capacity of a hard-disk drive. This option is
undefined for removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortHCapacity
--SataPortHDriveType*
Valid Arguments
read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortHDriveType
--SataPortHModel*
Valid Arguments
read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortHModel
--SataPortI
Valid Arguments
Off, Auto
Description
Turns the SATA port I to Auto or Off. This option can be replicated.
Example:
A:>syscfg --SataPortI=Auto
60