Reference Guide

Example:

A:>syscfg --ProcConfigTdp=Nominal

--ProcX2Apic

Valid Arguments Enabled, Disabled

Description

Enables or disables the x2APIC mode.

Example:

A:>syscfg --ProcX2Apic=Enabled

SATA Settings

You can manage the BIOS SATA settings using the options in this group.

--EmbSata

Valid Arguments

Off, AtaMode, RaidMode, AhciMode

Description

Configures an embedded SATA RAID controller. This option can be

replicated.

• off /Off — disables the embedded SATA RAID controller.

• combined— sets the SATA RAID controller to combined mode.

• ata/ AtaMode— sets SATA RAID controller to ATA mode.

• ahci/ AhciMode— sets ATA RAID controller to ahci mode.

• raid/RaidMode — sets SATA RAID controller to RAID mode.

• qdma — sets the SATA RAID controller to support ATAPI devices

at transfer rates much higher than PIO. A device driver must be

installed on your system to use the QDMA mode.

Example:

A:>syscfg --EmbSata=Off

--eSataPort1

Valid Arguments

Off, Auto

Description

Sets the embedded SATA port1 to Auto or Off.

Example:

A:>syscfg --eSataPort1=Off

--eSataPort1Capacity*

Valid Arguments

read-only

Description

Displays the total capacity of a hard-disk drive. This option is

undefined for removable-media devices such as optical drives.