Reference Guide

both front and back USB ports. The USB keyboard and mouse devices
functions in certain USB ports during the boot process, depending on
the selection. After an operating system driver is loaded, the USB
ports are enabled or disabled as per the field setting.
Example:
A:>syscfg --UsbPorts=AllOn
--Usb3Setting
Valid Arguments Auto, Enabled, Disabled
Description
Enables or disables the USB 3.0 port.
• Auto —USB ports operate at USB 2.0 speed.
• Enabled—
USB ports operates at USB 3.0 speed.
• Disabled—
USB 3.0 host controller is disabled and the speed is set to USB
2.0.
Example:
A:>syscfg --Usb3Setting=Auto
--CurrentEmbVideoState
Valid Arguments
read-only
Description
Displays the current state of the Embedded Video Controller.
Example:
A:>syscfg --CurrentEmbVideoState
--InternalSdCardPrimaryCard
Valid Arguments
SdCard1, SdCard2
Description
Sets an internal SD card as the primary SD card.
A:>syscfg --InternalSdCardPrimaryCard=SdCard1
Network Settings
You can manage the system network settings using the options in this group.
--PxeDevnInterface
Valid Arguments
read-only
Description
Displays the NIC interface used for the PXE device.
40