Reference Guide

--SetLegacyHddOrderFqddn
Valid Arguments <string>
Description
Displays the list of FQDDs representing the legacy hard-disk drive list
to be applied on the next boot.
NOTE: The value of n in SetLegacyHddOrderFqddn can be 1–16.
Example:
A:>syscfg --SetLegacyHddOrderFqdd1=xxxx,yyy,zzzz
Integrated Devices
You can use the options in this group to manage the integrated devices such as internal NIC and
integrated USB.
--EmbNicPortnBootProto
Valid Arguments
Unknown, None, Pxe, Iscsi
Description
Controls the legacy boot protocol of the LOM port specified by the
embedded NIC port number. This is a write-only attribute. This
attribute is for systems management software use, and does not
appear in system BIOS setup. This attribute always returns Unknown,
when read. There is no change to the LOM port legacy boot protocol
setting when Unknown is returned. An error is returned if written with
a setting (None, PXE, or iSCSI) that is not supported by the LOM Port.
Example:
A:>syscfg --EmbNicPortnBootProto=Unknown
--EmbVideo
Valid Arguments
Enabled, Disabled
Description
Enables or disables the BIOS support for the Embedded Video
Controller
Example:
A:>syscfg --EmbVideo=Enabled
--IntegratedNetwork1
Valid Arguments
Enabled, DisabledOs
Description Enables or disables Integrated Network 1.
36