Reference Guide

– Displaying the FQDDs in the legacy HDD list and boot order list
• Addition of the Network Settings, for configuring the PXE devices.
• Support for the following in Integrated Devices group:
– Configuring the USB 3.0 port
– Configuring internal SD primary card
– Configuring embedded video controller
– Configuring the current state of the embedded video controller
• Support for the following in the Serial Communication group:
– Configuring the serial communication as Auto
• Support for the following in the System Profile group:
– Configuring the system memory frequency to 1866MHz or 2133MHz
– Configuring energy efficient turbo
– Configuring the number of turbo boost enabled cores for a processor
– Configuring the processor uncore frequency
• Support for the following in the System Security group:
– Configuring TPM information and TPM command
– Configuring secure boot and secure boot policy
• Support for the following in the Miscellaneous group:
– Configuring Legacy Video Option ROM
Group Option Equivalent RACADM Option
BIOS Option Settings --BootSeq BIOS.BiosBootSettings.BootSeq
--HddSeq BIOS.BiosBootSettings.HddSeq
Boot Settings --BootMode BIOS.BiosBootSettings.BootMode
--BootSeqRetry BIOS.BiosBootSettings.BootSeqRetry
--HddFailover BIOS.BiosBootSettings.HddFailover
--SetBootOrderFqddn BIOS.BiosBootSettings.Fqddn
--SetLegacyHddOrderFqddn BIOS.BiosBootSettings.SetLegacyHdd
OrderFqdd
Integrated Devices --EmbNicPortnBootProto BIOS.ProxyAttributes.EmbNicPortnBo
otproto
--EmbVideo BIOS.IntegratedDevices.EmbVideo
--IntegratedNetwork1 BIOS.IntegratedDevices.IntegratedNe
twork1
25