Reference Guide

Error Code Message
1011 Input values for vdiskprotectioninfo and vdpi are 1 and 0.
1012 vdiskprotectioninfo or vdpi option is not available on the
controller.
1013 Input array disks or hotspares are not PI-capable.
1014 Creation of RAID 10 virtual disk with Uneven Span failed.
1015 Spanlength is not required for creating a RAID10 virtual disk
on this controller.
1016 Unsupported operation. RAID 6 and RAID 60 virtual disks which
are T10 PI enabled do not support Slow Initialize.
1017 Operation is not supported. The specified controller does not
have encryption capability.
1018 Operation is not supported. Encryption key is not present on
the specified controller.
1019 The specified array disks or hotspares do not have encryption
capability.
1020 The specified controller does not have a locked foreign
configuration.
1021 Invalid passphrase.
1022 Input values for secureflag and sf are 1 and 0.
1023 Unsupported operation. Preserved cache is not present on the
controller.
1024 Invalide Key Id
1025 Encryption key is already set for the controller.
1026 Cannot delete the encryption key because secure virtual disk
is present.
1027 The passphrase is invalid or old.
1028 Cannot increase the virtual disk size due to lack of free
space or due to the presence of partial virtual disks on the
same set of array disks.
1029 The percentage value of virtual disk size must be in the range
1-100.
1030 Error! Cannot discard the preserved cache. Use '-force' option
to discard the cache.
1031 Cannot create a new virtual disk because preserved cache is
present on the controller. To clear the cache, either import
the related virtual disks or discard the cache.
176