Reference Guide

Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
controllerid=i
d vdisk=id
action=consist
encycheck
Example:
A:>raidcfg -vd -c=2 -vd=2 -
ac=cc
-vd -c=id -
vd=id -ac=ccc or
vdisk
controllerid=i
d vdisk=id
action=cancelc
onsistencychec
k
NA NA
Cancels the consistency check for the
specified virtual disk.
Example:
A:>raidcfg -vd -c=2 -vd=2 -
ac=ccc
Enumerating Array Disks
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for enumerating
array disks (hard-drives).
NOTE: You can also use pdisk or -pd instead of adisk or -ad to specify an array disk.
Table 35. Enumerating Array Disks (Hard Drives)
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters/
Arguments
Description
-ad -c=id or
adisk
controllerid=i
d
NA NA
Lists all the array disks attached to the
specified RAID controller. This option
combination is mandatory.
NOTE: The following example
displays the output of a Series 7
controller.
NOTE: The software controller does
not display the NegSpeed,
CapSpeed, Certified and
Supported parameters.
Example:
A:>raidcfg -ad -c=2
Controller: PERC H710P Adapter
****** Physical Drive ******
Vendor: DELL(tm)
Model: ST3300657SS
Protocol: SAS
Media: HDD
NegSpeed: 6144 Mbps
CapSpeed: 6144 Mbps
Certified: YES
138