Reference Guide

Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-vd -vd=id -
ac=svdn - vdn=
<string> -
c=id or vdisk
vdisk= id
action=
setvdname
vdname=<string
>
controllerid=
id
NA NA
Sets the name of the specified virtual
disk on the specified controller.
Example:
A:>raidcfg -vd -vd=2 -ac=svdn -
vdn=xxx -c=2
RAIDCFG Command successful!
Replacing Physical Disk Of A Virtual Disk
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for replacing the
physical disk of a virtual disk with a ready state disk.
Table 33. Replacing Physical Disk Of A Virtual Disk
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-vd -
ac=replacepd -
vd=id
ch:targ:encl -
c=id
or
vdisk
action=replace
pdisk adisk|
pdisk=channel:
target:enclosu
re
controllerid=i
d
NA NA
Replaces the physical disk of a virtual
disk by a ready state disk, whose size is
greater than or equal to the size of the
physical disk.
Example:
A:>raidcfg -vd -ac=replacepd -
vd=2 -c=2 -src=0:1 -dest=0:1
Consistency Check For Virtual Disk
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for a consistency
check for a virtual disk.
Table 34. Consistency Check For Virtual Disk
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-vd -c=id -
vd=id -ac=cc or
vdisk
NA NA
Check consistency for a specified virtual
disk.
137