Reference Guide

Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-sf or
secureflag
0, 1
Creates a secured virtual disk on
controllers with encryption capability
and encryption key.
Example:
A:>raidcfg -ctrl -ac=cvd
-c=2
-ad=1:4,1:8 -sf=1
RAIDCFG Command successful!
Initializing Virtual Disks
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for initializing
selected virtual disks.
Table 27. Initializing Virtual Disks
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-vd -c=id -
vd=id -ac=fi or
vdisk
controllerid=i
d vdisk=id
action=fastini
t
NA NA
Initializes the selected virtual disk in the
selected controller with the fastinit
command. This feature is supported on
PERC 5 and later controllers and is not
supported on SAS controllers.
Using the fastinit command on
unsupported controllers returns an
error.
Example:
A:>raidcfg -vd -c=2 -vd=2 -
ac=fi
-vd -c=id -
vd=id -ac=sli
or vdisk
controllerid=i
d vdisk=id
action=slowini
t
NA NA
Initializes the selected virtual disk in the
selected controller with the slowinit
command. This feature is supported on
PERC 5 and later controllers and is not
supported on SAS controllers. Using the
slowinit command on unsupported
controllers returns an error.
Example:
A:>raidcfg -vd -c=2 -vd=2 -
ac=sli
-vd -c=id -
vd=id -ac=ci or
vdisk
controllerid=i
NA NA
Cancels the initialization of the virtual
disk with the cancelinit command. This
feature is supported on PERC 5 and later
controllers and is not supported on SAS
132