Reference Guide

Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
d
action=enablea
utoimport
autoimport=<0|
1>
Example:
A:>raidcfg -ctrl -c=2 -ac=eai -
ai=0
Creating Virtual Disks
The following table lists the RAIDCFG options, parameters, and predefined arguments for creating virtual
disks.
NOTE: If you create a virtual disk on Windows PE, reboot the system.
Table 26. Creating Virtual Disks
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-ctrl -ac=cvd -
c=id -ad=
ch:targ,ch:tar
g
,
... [or
ch:targ:encl,.
..]
or
controller
action=
createvdisk
controllerid=
id adisk=
channel:target
: lun,...
channel:target
: lun,...
[or
channel:target
:
enclosure,...]
NA NA
Creates a virtual disk comprising the
properties supplied. This option
combination is mandatory.
NOTE: Create a bootable virtual
disk only from the disk drives of slot
0-3 of the system.
For SCSI controllers, the value of LUN
should always be 0.
For SAS controllers, the value of
enclosure can be non-zero, in which
case you must specify values for
channel, target, and enclosure.
Example:
A:>raidcfg -ctrl -ac=cvd
-c=2
-ad=1:4,1:8 -r=1 -ssz=32
-cp=d -rp=nra
-wp=wt -fd=1:1
RAIDCFG Command successful!
-cp or
cachepolicy
d or e
Valid arguments for disk cache policy
are:
• d — Disable
• e — Enable
The -cp option is optional and can be
added to the command line in any order
125