Reference Guide

Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-
action=listglo
balhotspare
controllerid=i
d
Example:
A:>raidcfg -ad -ac=lghs -c=2
RAIDCFG Command successful!
-ctrl —ac=rghs
-c=id -ad|-pd=
ch:targ:encl or
controller
action=removeg
lobalhotspare
controllerid=i
d adisk|
pdisk=channel:
target:enclosu
re
NA NA
Unassigns all the specified global hot
spares to a disk on the specified
controller.
Example:
A:>raidcfg -ctrl -ac=rghs -c=2-
ad=0:1,0:2
RAIDCFG Command successful!
Setting And Displaying The PCIe Link Speed
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for setting and
displaying the Peripheral Component Interconnect Express (PCIe) link speed of the controller.
Table 22. Setting and Displaying the PCIe Link Speed
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
--ctrl -c=id -
ac=spciels -
spd=<2 | 3>
or
controller
controllerid=i
d
action=setpcie
linkspeed
speed=<2 | 3>
NA NA
Sets the PCIe link speed of the controller
to PCIe Generation 2 or 3.
NOTE: Reboot the system to apply
the setting.
Example:
A:>raidcfg -ctrl -c=2 -
ac=spciels -spd=2
RAIDCFG Command successful!
--ctrl -c=id -
ac=gpciels
or
controller
controllerid=i
d
action=getpcie
linkspeed
NA NA
Displays the PCIe link speed of the
controller.
Example:
A:>raidcfg -ctrl -c=2 -
ac=gpciels
RAIDCFG Command successful!
123