Reference Guide

Table 18. Deleting Encryption Key
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=dsk
or
controller
controllerid=i
d
action=deletes
ecuritykey
NA NA
Deletes the encryption key of the
encryption-capable controller.
Example:
A:>raidcfg -ctrl -c=2 -ac=dsk
Resetting The Controller
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for resetting the
controller.
Table 19. Resetting The Controller
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=rst or
controller
controllerid=i
d action=reset
NA NA
Resets the specified controller.
Example:
A:>raidcfg -ctrl -c=2 -ac=rst
Enabling And Disabling Persistent Dedicated Hot Spares
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for enabling and
disabling dedicated hot spares.
Table 20. Enabling And Disabling Persistent Dedicated Hot Spares
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
--ctrl -c=id -
ac=ephs
or
controller
controllerid=i
d
action=enablep
eristenthotspa
re
NA NA
Assigns the slot corresponding to the
hot spare drive as persistent. Any drive in
the slot functions as a hot spare if the
drive is qualified to be a hot spare.
NOTE: Assign hot spare for a
bootable virtual disk only from the
disk drives of slot 0-3 of the system.
121