Reference Guide

Function Call Description
Example:
A:>raidcfg -se -envn=HOTSPARES -envc=
gethotspares -c=2
HOTSPARES=1:8:1,1:9:1
RAIDCFG Command successful!
getfreeadisks
Returns the free array disks.
A:>raidcfg -se -envn=GETFREEADISKS -envc=
getfreeadisks -c=2
GETFREEADISKS=0:3:1,0:4:1
RAIDCFG Command successful!
getadiskcount
Returns the total number of array disks.
A:>raidcfg -se -envn=GETADISKCOUNT -envc=
getadiskcount -c=2
GETADISKCOUNT=1
RAIDCFG Command successful!
Importing And Clearing Foreign Configurations
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for foreign
configurations.
Table 13. RAIDCFG Options for Foreign Configurations
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=fgnimp
or
controller
controllerid=i
d
action=foreig
nimport
NA NA
Imports the foreign configuration
detected in the selected controller. This
feature is supported on PERC 5 and later
controllers and is not supported on SAS
controllers.
If you use this argument on a controller
that does not have a foreign
configuration, the No Foreign
configuration present in the
controller message is displayed.
NOTE: For importing secured
foreign configuration, use
importsecureforeignconfig or
isfc. For more details, see
Importing Secured Foreign
Configurations.
117