Reference Guide

Table 10. Enumerating RAID Controllers
Mandatory
Options and
Arguments
Optional
Parameters
Valid
Parameters
Arguments
Description
-ctrl or
controller
NA NA
Lists all the RAID controllers on the host
system, along with select property
information. This option is mandatory
Example:
raidcfg -ctrl
Controller_ID/Slot_ID: 4
Controller_PCI_ID: 9:0:0
Controller_Name: PERC H710P
Adapter
Channels: 2
No.of Virtual_Disks: 17
Array_Disks:
0:0:1,0:1:1,0:2:1,0:3:1,0:4:1,0:5:
1, 0:6:1, 0:7:1
Persistent Hot Spare: Disabled
Firmware Version: 21.2.0-007
Controller_Boot_Mode: 2 (Headless
continue on error)
Enable_Auto_Import: No
T10 Protection Info Capable: No
RAIDCFG Command successful!
-c or
controllerid
<valid
controller
ID number>
Displays the properties for the RAID
controller with the specified controller ID.
This option combination is mandatory.
Example:
raidcfg -ctrl -c=4
Controller_ID/Slot_ID: 4
Controller_PCI_ID: 9:0:0
Controller_Name: PERC H710P
Adapter
Channels: 2
No.of Virtual_Disks: 17
Array_Disks:
0:0:1,0:1:1,0:2:1,0:3:1,0:4:1,0:5:
1, 0:6:1, 0:7:1
Persistent Hot Spare: Disabled
Firmware Version: 21.2.0-007
Controller_Boot_Mode: 2 (Headless
continue on error)
Enable_Auto_Import: No
T10 Protection Info Capable: No
RAIDCFG Command successful!
Setting Environment Variables
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for setting the CLI
environment.
114