Release Notes

• The legacy attribute values enable and disable are also supported for 12G systems for backward
compatibility. In future releases, these arguments might be deprecated. Try to use the values
shown in help message for BIOS options for 12G server.
RAIDCFG Issues
• You can assign up to 10 Global hot spares using Raidcfg. Use the Dell OpenManage Server
Administrator Storage Management for assigning more than 10 Global hot spares.
• On Dell PERC H310 controllers, conversion of a RAID Capable Disk to Non-RAID disk and vice
versa is not supported using raidcfg.
RACADM Issues
• If you use virtual media to boot into Windows PE, executing certain RACADM commands may
cause Windows PE to crash.
• After generating the rac configuration file using the "racadm getconfig -f <file_name>"
command, comment out the following properties in the configuration file before you update a
configuration using the "racadm config -f <file_name>" command:
#cfgRacTuneCtrlEConfigDisable=0
#cfgRacTuneLocalConfigDisable=0
• VLAN objects (cfgNicVLanEnable, cfgNicVLanId, and cfgNicVLanPriority) displayed using the
local RACADM command "racadm getconfig -g cfgLanNetworking" or VLAN objects generated
in the configuration file using the local RACADM command "racadm getconfig -f <file name>"
do not contain the leading "#" symbol, which indicates that they are read-only.
Windows PE Issues
• Running partcfg.bat may fail when virtual media is enabled. For the hard disk, partcfg.bat uses
the driver letter "c:". When virtual media is enabled, sometimes, the virtual device gets assigned
with the drive letter "c:" and partcfg.bat execution fails. To run partcfg.bat successfully, either
disable the virtual media or use the diskpart command to assign a free driver letter for
partcfg.bat.
Installation Prerequisites
Before extracting Deployment Toolkit components, ensure that you have:
• The DTK ISO image available at support.dell.com.
• A workstation that has
• 512 MB RAM
• A writable CD drive and CD-writing software (optional)
• Network access
A minimum BIOS version is recommended on some of the platforms for all the DTK options to work
properly. In general, it is a good practice to use the latest ("n") version of BIOS firmware or the "n-1"
version that is available on "support.dell.com."
Installation Procedure
For complete installation and deployment instructions, see the "Dell OpenManage Deployment
Toolkit User's Guide."
Installation and Configuration Notes
The sample scripts are provided as examples for customers who want to develop their own
deployment process. Some customers may find that the scripts work well in their environment, while
Formatted: Bullet