Release Notes

• Network access
• A target system with a CD/DVD drive if you are performing a local deployment or network access if you
are performing a network deployment.
• All Deployment Toolkit utilities, sample scripts, and sample configuration files.
• All required Windows PE drivers, operating system drivers, and the Dell utility partition image file.
• A minimum BIOS version is recommended on some of the platforms for all the DTK options to work
correctly. In general, it is good practice to use the latest ("n") version of BIOS firmware or the "n-1" version
that is available on "support.dell.com."
For more information see the Dell Systems Software Support Matrix available in the required version
of OpenManage Software at dell.com/openmanagemanuals.
Operating System Requirements
The following operating systems are supported in this release:
DTK utilities (SYSCFG and RAIDCFG) and scripts support Windows PE 3.0 (32-bit and 64-bit),
Windows PE 4.0 and Windows PE 5.0.
For Microsoft WinPE and OS deployment support limitations refer to
http://technet.microsoft.com/en-us/library/hh824993.aspx.
Using DTK utilities you can deploy the following Windows operating systems:
• Windows Server 2008 R2 SP1
• Microsoft Windows Server 2012 Foundation, Essentials, Standard, and Datacenter editions
• Microsoft Windows Server 2012 R2 Foundation, Essentials, Standard, and Datacenter editions
What’s New
•
Support for Slim Perc controller
•
Support for following Dell PowerEdge servers
•
T430
•
FC630
•
R530
•
R430
•
M630
Note: DTK version 5.0.2 is supported only on the following systems:
•
Dell PowerEdge T430
•
PowerEdge FC630
•
PowerEdge R530
•
PowerEdge R430
•
Dell PowerEdgeM630
The new features for this release include:
• Support for PERC H730P Slim
NOTE: For the list of supported operating systems and Dell servers, see the Dell Systems Software Support Matrix at
dell.com/openmanagemanuals .
Important Notes
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/
).