Reference Guide

• On 12G and later systems
: read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortEModel
Applicable Systems PowerEdge 12G and later systems
--SataPortF/--sata5
Valid Arguments
• On systems prior to 12G
: auto, off
• On 12G and later systems
: Off, Auto
Description
Turns the SATA port 5 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata5=auto
sata5=auto
NOTE: This option maps to --sata_f for PowerEdge 9G systems.
Applicable Systems All PowerEdge systems.
--SataPortFCapacity*
Valid Arguments
• On systems prior to 12G
: NA
• On 12G and later systems
: read-only
Description
Displays the total capacity of a hard-disk drive. This option is
undefined for removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortFCapacity
Applicable Systems PowerEdge 12G and later systems
--SataPortFDriveType*
Valid Arguments
• On systems prior to 12G
: NA
• On 12G and later systems
: read-only
Description
This option indicates type of device attached to this SATA port.
69