Reference Guide

Table 41. UPINIT Linux-Specific Error Codes and Messages
Error Code Message
31 Error: Invalid disk specified.
32 Error: Mount failed.
33 Cannot create mount point <mount point>.File exists
34 Error: fdisk failed.
UPINIT Windows PE-Specific Error Codes And Messages
The list of error codes and messages below are specific to the Windows PE environment.
Table 42. UPINIT Windows PE-Specific Error Codes and Messages
Error Code Message
31 Error: DISKPART failed.
32 Error: DISKPART command file not found.
RAIDCFG Error Codes And Messages
The RAIDCFG utility checks your commands for correct syntax when you enter them. When you enter a
command, a message displays stating the results of the command.
Failure Messages
The RAIDCFG utility failure messages provide error codes to help diagnose why some commands do not
succeed. See table below for a list of the error codes and the associated messages.
Table 43. RAIDCFG Error Codes and Messages
Error Code Message
0 RAIDCFG Command successful!
1 Error! Incorrect Syntax.
2 Failure!
3 Illegal operation
4 Unsupported operation
5 Device not found.
6 Format boot drive illegal
7 Buffer too small.
8 Virtual Disk contains boot partition. Use force option to
delete.
9 Init boot drive failed.
199