Reference Guide

Failure Messages Solutions
System Services and/or CSIOR
disabled.
Enable CSIOR from <F2> screen.
UPINIT Common Error Codes And Messages
The UPINIT utility checks your commands for correct syntax. When you enter a command, a message is
displayed stating the results of the command.
Failure Messages
The UPINIT utility failure messages provide error codes to help diagnose why some commands do not
succeed. Table below lists error codes and messages common to Linux and Microsoft Windows PE
environments.
Table 40. UPINIT Common Error Codes and Messages
Error Code Message
0 Dell Utility Partition created successfully.
1 Error: Disk ID not specified.
2 Error: SIZE not specified.
3 Error: Utility Partition Image file not specified.
4 Error: DRMK Path not specified.
5 Error: Dell Utility Partition already exits. Please use --
overwrite option to upgrade or overwrite.
6 Error: Partitions exists. Please clear all the partitions
before running upinit.sh.
7 Error: DOS file(s) not found at the specified path.
8 Error: UP IMAGE not found at the specified location.
9 Error: format failed.
10 Error: Invalid size. Size should be a number between 32 and
2000.
11 Error: sysdrmk failed.
12 System Error.
13 Error: Invalid Argument: <argument>
14 Error: Unzip failed.
UPINIT Linux-Specific Error Codes And Messages
The list of error codes and messages are specific to the Linux environment.
198