Quick Reference Guide

--MonitorMwait
Valid Arguments
• On systems prior to 12G
:NA
• On 12G and later systems
: Enabled, Disabled
Description
Enables or disables Monitor/Mwait instructions. You can disable
Monitor/Mwait only when C state is disabled in Custom mode.
Example:
A:>syscfg --MonitorMwait=Enabled
MonitorMwait=Enabled
Applicable Systems PowerEdge 12G and later systems.
--ProcC1E/--cpucle
Valid Arguments
• On systems prior to 12G
: enable, disable
• On 12G and later systems
: Enabled, Disabled
Description
Enables or disables C1-E. By default, it is enabled. This option can be
replicated.
Example:
A:>syscfg --cpucle=enable
cpucle=enable
Applicable Systems PowerEdge 11G and later systems
--ProcCStates/--cstates
Valid Arguments
• On systems prior to 12G
: enable, disable
• On 12G and later systems
: Enabled, Disabled
Description Enables or disables the power c states of the processor. When
enabled, the processor can operate in all available power states.
A:>syscfg --cstates=enable
cstates=enable
Applicable Systems PowerEdge 11G and later systems
--ProcPwrPerf/--cpupowermode
Valid Arguments
• On systems prior to 12G
80