Users Guide

Toolkit Components Purpose
CAUTION: Do not edit this file. Incorrect edits might cause raidcfg.exe to
fail.
stsvc.ini
Configuration file used by raidcfg.exe.
CAUTION: Do not edit this file. Incorrect edits might cause raidcfg.exe to
fail.
sys.ini
A .ini file used with syscfg.exe.
IDRAC
Configures iDRAC 6.
NOTE: This feature may not be supported on all systems.
IDRAC7
Configures iDRAC 7.
NOTE: This feature may not be supported on all systems.
RAC 4
Configures Dell Remote Access Controller (DRAC) 4/P and DRAC 4/I.
RAC 5
Configures DRAC 5/iDRAC.
pci.ids
Reports PCI devices when used with syscfg.exe.
disclaimer.txt
Displays the disclaimer for the tools.
RaidcfgErrorCodes.txt
Lists the error codes and messages for the raidcfg.exe tool.
SyscfgErrorCodes.txt
Lists the error codes and messages for the syscfg.exe tool.
System Utilities And Supported Files For Linux
The following table lists the files, located at /opt/dell/toolkit/bin and the supporting libraries located in /opt/dell/toolkit/lib
on systems running the Linux operating system. These are the core tools (utilities) that perform pre-operating system
configuration and deployment tasks. See the Dell OpenManage Deployment Toolkit Command Line Interface Reference
Guide at dell.com/suport/manuals for complete information about the capabilities of each DTK utility.
Toolkit Components Purpose
pci.ids Used with syscfg to report PCI devices.
racadm Wrapper script, which invokes racadm4, racadm5, or racadm6 depending on the
Remote Access Controller (RAC) on your system.
racadm4 Configures DRAC 4/P and DRAC 4/I RACs.
racadm5 Configures DRAC 5 RACs.
racadm6 Configures iDRAC 6.
NOTE: This feature may not be supported on all systems.
raidcfg Creates and reports RAID information.
RaidcfgErrorCodes.txt Lists the error codes and messages for the raidcfg tool.
stsvc.ini Configuration file used by raidcfg.
syscfg
• Reports and configures BIOS, BMC, and DRAC.
• Maintains the system state between reboots.
27