Reference Guide

SYSCFG Options For State Configuration
The following table lists all valid options and arguments along with a description of the expected behavior of each
option.
NOTE: Some of the following options or arguments are not available on all systems.
Table 55. SYSCFG Options and Arguments for State Configuration
Option Valid Arguments Description
-b or --byte <string>
Specifies a value to write to state data. The format of the argument
must be in decimal format unless the -x option is given. If the -x option
is given, the value is interpreted as hexadecimal format. The value can
optionally contain 0x. The decimal range is 0–255, and the
hexadecimal range is 0x00–0xFF.
Example:
A:>syscfg -b 1
The state byte has been set to 1.
A:>syscfg -b 2 -x
The state byte has been set to 0x02.
-r or --read*
NOTE: The
asterisk is not
part of the
command
syntax.
NA
Reads the value of state data. When used with the -x option, the value
is reported in hexadecimal format (0xNN).
Example:
A:>sysfg -r -x
The state byte has been set to 0x02.
A:>syscfg -r
The state byte has been set to 2.
-x or --hex
None
Specifies that a value should be in hexadecimal format.
Example:
A:>sysfg -r -x
The state byte has been set to 0x01.
A:>sysfg -x -b 0x02
The state byte has been set to 0x02.
SYSCFG for System Configuration
SYSCFG enables system configuration and reporting. It reports system identification values, processor types and
speeds, memory size, and detects device using PCI scan.
Options For System Configuration
Table below documents valid options and arguments along with a description of the expected behavior of each option.
Options and arguments are case sensitive. All options and pre-defined arguments are lowercase unless stated
otherwise.
98