Reference Guide

Option Sub-option Valid Arguments Description Applicable
Systems
--
channelprivlm
t
user,
operator,
administrat
or
Sets the maximum privilege
level accepted for the serial
channel. This sub-option can
be replicated.
Example (to configure the
serial channel with IPMI over
serial disabled and the
maximum privilege level set to
administrator):
A:>syscfg
serialchannel
access --
ipmioverserial=disab
le
--
channelprivlmt=admin
istrator
serialchannelaccess
ipmioverserial=disab
le
channelprivlmt=admin
istrator
serialchannelinfo
Table 46. serialchannelinfo options
Option Sub-option Valid
Arguments
Description Applicable Systems
--
serialchanneli
nfo or sci
Displays media and protocol
information about the serial
channel. This option cannot be
replicated.
All PowerEdge
systems
--mediumtype
NA Displays the medium type for the
serial channel. This sub-option
cannot be replicated.
--prottype
NA Displays the protocol type for the
serial channel. This sub-option
cannot be replicated.
--ssnsupport
NA Displays the session support
information for the serial
channel. This sub-option cannot
be replicated.
--
activessncoun
t
NA
Displays the number of sessions
that are activated on the serial
channel. This sub-option cannot
be replicated.
91