Reference Guide

Option Sub-option Valid Arguments Description Applicable Systems
softshutdow
n </
argument>
In Linux, the system turns off
immediately.
NOTE: In Windows PE, this
option does not work.
NOTE: This option applies only
to PowerEdge systems that are
configured with a BMC.
NOTE: This argument requires
ACPI support to function
properly.
racreset*
Table 44. racreset option
Option Sub-option Valid Arguments Description Applicable Systems
--racreset*
NA NA Resets the RAC. It cannot be
accompanied with any other option.
This option cannot be replicated.
All PowerEdge
systems
serialcfgparams
Option Sub-option Valid Arguments Description Applicable Systems
serialcfgpa
rams or scp
Configures and displays serial
configuration parameters. This
option can be replicated.
All PowerEdge
systems
--
connectionmod
e
basic,
terminal
Sets the connection mode used to
perform IPMI messaging to the
BMC. This sub-option can be
replicated.
--msgcomm
noflowctrl,
rtscts
Sets the IPMI message
communication flow control. This
suboption can be replicated.
--
msgcommdtrhan
gup
NA Reports the IPMI message
communication DTR hang-up. This
suboption cannot be replicated.
--
msgcommbitrat
e
9600,
19200,
57600,
115200
Sets the IPMI message
communication baud rate in bits
per second (bps). This sub-option
can be replicated.
--
tmcfglineedit
ing
enable,
disable
Sets the line editing value for
terminal mode configuration. This
sub-option can be replicated.
--
tmcfgdelctrl
del, bksp
Sets the delete control value for
terminal mode configuration. This
sub-option can be replicated.
89