Reference Guide

Description
Sets the second line of user-defined text on the system LCD. This option can be
replicated. For more information on delimiters, see Command Line Option
Delimiters.
Applicable Systems All PowerEdge systems
loaddefaults*
Table 37. loaddefaults option
Option Sub-option Valid Arguments Description Applicable Systems
--
loaddefaul
ts*
NA NA
Restores the BMC to the defaults
originally loaded on the controller.
This option is used to return the
BMC to a known-good state. This
option cannot be replicated.
NOTE: The NMI, power button,
and SOL defaults are not reset
by using this option.
Example:
A:>syscfg --loaddefaults
Loading defaults...
All PowerEdge
systems
nextboot
Table 38. nextboot option
Option Sub-option Valid
Arguments
Description Applicable Systems
--nextboot or
--
OneTimeBootSeq
Dev
NA valid device
name (from the
bootseq
option device
list)
Sets the specified device as the
first device in the boot order for
the next boot cycle only. The
device must be a device from the
bootseq option device list. Run
the bootseq option to see a list
of available device names. For
more information, see
--bootseq.
This option is not replicated.
All PowerEdge
systems
84